4EVAC Compact 500 User Manual

Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4EVAC Compact 500 quick guide
DoP OD 16.47
Author:
DD
Design revision:
2.0
Page 1 of 33
SUMMARY
This document is the quick guide for installation and initial setup of Compact 500 Voice Evacuation System.
It explains how the hardware of Compact 500 should be installed and configured. Quick guide is addressed
to the trained technical personnel, such as installers, service technicians and commissioning engineers.
REVISION AND APPROVAL
Rev.
Date
Nature of Changes
Approved By
03
22-09-2017
Corrected audio performance specs
DD
04
25-03-2020
General update
AJH
05
04-06-2020
Corrections
TvdH

4EVAC Compact 500 Specifications

General

Brand	4EVAC
Model	Compact 500
Category	Safety Equipment
Language	English

Summary

Document Summary

Package Contents

Required Additional Equipment

Initial Access and Permissions

Unboxing Procedure

Wall Mounting Guide

System Installation

Opening the Cabinet

Steps to open the Compact 500 main unit cabinet for access to internal components.

Mains Power Connection

Connecting the 110-230V AC mains cable to the system's power input.

Battery Installation and Connection

Procedure for installing and connecting the 2 x 12V lead-acid batteries.

Input Signal Connections

Connecting external triggering signals for evacuation, silence, and reset.

System Status Relay Outputs

Description of the three potential-free relay outputs for system status monitoring.

General Purpose Inputs/Outputs

Configuring and using General Purpose Inputs (GPI) and Outputs (GPO).

Loudspeaker Line Configuration

Connecting and configuring loudspeaker lines, including bridging for 200W output.

Startup and Commissioning

Power-On/Off Sequence

Correct sequence for powering the system on and off to avoid unwanted effects.

Power Supply Unit Indicators

Interpreting LED indicators for power supply, battery, and charger status.

Loudspeaker Line Calibration

Calibrating loudspeaker line impedance measurements for accurate monitoring.

Amplifier Unit Status Indicators

Understanding the GREEN and RED LED indicators on amplifier units for status.

Cable and Connection Specifications

Technical Specifications