C. CONTENTS
1. 1 x base panel,
2. 1 x plastic skirt,
3. 1 x arch template,
4. 1 x duct template,
5. 1 x battery compartment with switch and wires,
6. 1 x battery compartment cover,
7. 1 x motor stand,
8. 1 x motor cover,
9. 2 x attachment bar,
10. 1 x propeller,
11. 1 x double-sided adhesive tape,
12. 1 x motor with wires,
13. screws,
14. 1 x reusable adhesive ,
15. 2 x terminal cap,
and 1 set of detailed instruction.
(Also required but not included: 4 x AAA, 1.5 volt batteries, small crosshead screwdriver.)
To Next Page
Loading...
