5th Wheel M2 - Riding Preparations and Operations; Pre-Ride Preparations; Starting and Riding the Scooter; Parking Guidelines

25
0155
km/h
123
7 Control System
Power Switch Gear IndicatorThrottle
Brake ControlLED DisplayBell
16 17
6 Riding and Parking
1.Choose a suitable place for riding the
scooter.
2.Unfold the scooter by following the
instructions described in the user manual and
wearing protective equipment.
1.Press the Power switch to turn on the scooter.
2.Stand on the pedal with one foot on the ground.
3.Slide the scooter forward and press the throttle
gently downward. And the scooter will move forward
slowly. When riding it smoothly, stand on the pedal
with both feet. The greater you press the throttle
downward, the faster the speed.
Note: For safety, M2 is designed with a non-zero
start. The throttle will take effect only after the
scooter slides forward for a certain distance.
1.Under normal circumstances, by pressing
the left brake, the scooter will stop moving
immediately. The greater you press the left
brake downward, the greater the braking
force.
2.In an emergency, you can step on the rear
brake with your foot to reach the front wheel
electronic brake and the rear wheel friction
brake at the same time.
Preparations before Riding the Scooter
Starting Riding the ScooterParking