5th Wheel TDR01Z - Product Description; Operation & Use

3. Product Description
3
4
Electronic instrument
Cushion
Taillight
Motor
Rear
suspension
shock
absorption
Mobile
auxiliary wheel
Pedal Kickstand
Ambient light
Front reflector
Rear reflector
Headlight
Upright folder
Complete E-bike folder
Engraving position of E-bike code (under the main beam)
Brake crank
Front
disc brake
Rear disc
brake
Preparation before riding
• Check whether the power circuit and lighting are in good conditions;
• Check whether the front and rear brakes work normally;
• Check whether the handlebar and front and rear wheels are fastened firmly;
• Check whether the tire pressure is normal;
• Check whether the reflectors are broken or contaminated before riding.
4. Operation & Use
Folding of handlebar
Installation of pedal
• Align the pedals to the pedal
crank holes;
• Install them with the tool handle.
• Push the handle switch upward
and open the handle outward;
• Flip the handlebar to one side.
Front suspension
shock absorption