Need help?Do you have a question about the 70mai Midrive UP04 and is the answer not in the manual?
General| Model | Midrive UP04 |
|---|---|
| Category | Dash Cameras |
| Field of View | 140° |
| Night Vision | Yes |
| Wi-Fi | Yes |
| GPS | No |
| Battery | Built-in |
| Power Supply | Car Charger |
| Loop Recording | Yes |
| G-Sensor | Yes |
| Parking Mode | Yes |
| Video Resolution | 1920x1080 |
| Storage | MicroSD card (up to 128GB) |
| Display | 2 inch LCD |
Choose a car fuse box with a suitable regular electric fuse (12-30V) or ACC power fuse.
Connect the power, ACC, and ground wires of the hardwire kit to the appropriate fuses.
Verify the hardwire kit's circuit and ACC signal functionality by testing power on/off cycles.
Route and secure the Type-C cable and hardwire kit neatly along the vehicle's interior.
Insert the SIM card into the hardwire kit's slot when the engine is off.
Connect the hardwire kit to the main device using the provided connecting cable.
To Next Page
