7th Sense Delta Media Server - Removable Power Supply; PSU Removal and Replacement

To Next Page

To Previous Page

Hardware Operation

Removable Power Supply

Delta Media Servers (3U models only – Nucleus and Infinity) are fitted with a removable power supply unit

(PSU). This can be replaced as follows:

To remove: Power down the server and then remove the IEC320 power connector from the server’s PSU.

Press the PSU’s release tab and pull the handle to slide the power supply out of the server:

To replace: Slide the replacement power supply into the server until it fully clicks home.

Refit the IEC320 power connector and power on the server.

Warning: The IEC320 power connector should never be inserted into the PSU when the PSU is not

fitted in a server.