37
Hardware Operation
© 2020 7thSense Design
Media SSD Storage
Take the slower group, split it into 2 groups following the initial process above, always comparing between 2
groups, not with the speeds observed for single disks.
Recreate the movie drive
Once you have identified and replaced the faulty disk, recreate the movie drive (see Assigning RAID Disks as
Movie Drives ) and share it.
Inconclusive test results
The fault in the end may not just be a single SSD, but an internal connection, cable or interface, in which case
the server will need to be returned to 7thSense Design for full diagnosis and repair.
27
To Next Page
Loading...