54
Hardware Operation
© 2020 7thSense Design
Front Panel Control and Display
Selection of Service Mode results in the menu below. The Enter key is used to agree to either put the server
into or out of Service Mode. You will be warned twice before the system does the restart.
All Nano, Nano 4k and Duo II servers use a Windows Embedded Operating System. This offers the advantage
of file write protection on loss of power.
By default, all embedded servers are shipped out of service mode. When an embedded server is not in service
mode its menu is Blue/Cyan as per any normal Delta server.
When not in service mode, the operating system disk is locked. Anything that is saved to the OS disks when not
in service mode, will be lost on reboot.
There are some exceptions to this rule which are the following:
·
Delta registry settings, including any changes made to preferences within Delta through Delta GUI, will
hold after a reboot.
·
The Delta/System area is read/write
·
All major media locations on the OS disks such as:
C:\7thSense
C:\Audio
C:\Blends
C:\Colour
C:\Geometry
C:\Images
C:\Meshes
C:\Sequences
C:\Shows
C:\Splines
C:\Text
When in Service Mode, the server OS disk is completely open and writeable with full Administrator access. If
you have a need to install drivers or additional software, you need to be in service mode to do this.
To Next Page
Loading...