7
Use a 3.5mm audio cable (not
included) to connect the audio
output from your device to
the AUX IN audio input on the
speaker’s back panel.
The speaker automatically
switches to the AUX IN audio, and
the indicator light on the front of
the speaker turns solid white.
Using the Aux In input
Press the + and –buttons on the top of the speaker (or use
the volume controls on your phone).
Step 5: Play music
8:45PM
Now playing
Media volume
Using Bass Boost
The Hex TLS speaker has a Bass Boost feature that
enhances the lower frequencies in your music. Bass Boost
is turned on by default. Press the button on the top of
the speaker to toggle Bass Boost on and o.
Speaker back
To listen to Bluetooth audio again, unplug the cable from
the speaker’s AUX IN jack. The speaker will try to reconnect
to the last Bluetooth device.
To Next Page
Loading...
