wired connection
1.
turn the mode switch to X mode, LEDs start to blink
2.
connect the arcade stick to your Windows device via its USB-C cable
3.
wait till the arcade stick is successfully recognized by your Windows device to
play
* LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate
player 2, 4 is the maximum number of players the arcade stick supports
Turbo function
1.
hold the button you would like to set turbo functionality to and then press star
button to activate its turbo functionality
2.
LED will blink when the button with turbo functionality is pressed
3.
hold the button with turbo functionality first then press star button to deactivate
its turbo functionality, LED will cease to blink
* joystick, home, select and start buttons are not included
control stick switch
use the control stick switch to shift the joystick function to either left joystick(LS),
directional pad (DP), or right joystick (RS)
To Next Page
Loading...
Need help?
General