8BitD0
M30 Bluetooth gamepad —instruction manual
home
8BitD0
M30
• [start]
xn: [start]
Switch
—
L
pair
d-pad
star
• press start to turn on the controller
*start
-select
x
c
+start
-select
x
c
home
• press hold start for 3 seconds to turn off the controller
• press hold start for 8 seconds to force turn off the controller
Switch
1—press g holdY start to turn on the controller, LEDsstartto rotate from left to right
2 —press &hold pair for 2 seconds to enter pairing mode, LEDspause forl second then startto rotate again
3 —go to your Switch Home Pageto click on Controllers, then click on Change Grip/Order. LEDs become solid
when connection is successful
4 —controller will auto reconnect to your Switch with the press of start once it has been paired
• when connected to your Switch, star button = Switch Screen Shot button
• home button = Switch HOME button
ZL ZR
left joystick
Screenshot
key
Android CD- input)
1—press & hold B &start to turn on the controller, LEDI blinks
home
2 —press &hold pair for 2 seconds to enter pairing mode, LED1 pauses forl second then starts to rotate again
3 —go to your Android device's Bluetooth setting, pair with [8BitDo M30 gamepad]. LEDbecomes solid when
connection is successful
4 —controller will auto reconnect to your Android device with the press of start once it has been paired
• USBconnection: connect the controller to your Android device via USBcable after step 1
12
left joystick
Turbo
Windows CX- input)
start
select
x
RI
home
1—press & hold X & start to turn on the controller, LEDs1& 2 blink
2 —press &hold pair for 2 seconds to enter pairing mode, LEDspause forl second then startto rotate again
3 —go to your Windows device's Bluetooth setting, pair with [8BitDo M30 gamepad]. LEDsbecome solid when
connection is successful
4 —controller will auto reconnect to your Windows with the press Ofstart once it has been paired
• USBconnection: connect the controller to your Windows device via IJSBcable after step 1
LB
1. [Y+ start]
2. [pair] 2
3. switch controllers -ih-m, Change Grip/Order
4. [start]
' Switch home Switch home
ZL
Android CD- input)
1. [B + start] 1
2. [pair] 2 1
3. Android iQåE*, [8BitD0 M30 gamepad] i±å,
4. [start]
* USB 1 USB
start
x
select
Windows CX- input)
2. [pair] 2 i", 1
3. Windows iZåIX*, [8BitDo M30 gamepad] iQå,
4. [start]
USB 1 USB
LB LT
left joystick
Turbo
macOS
Menu
View
o
LT
x
Xbox
x
O
home
home
Xbox
1—press g hold A startto turn on the controller, LEDs1,283 blink
2 —press &hold pair for 2 seconds to enter pairing mode, LEDspause forl second then startto rotate again
3—goto your macOSdevice'sBluetoothsetting, pairwith [WirelessController).LEDsbecomesolidwhen
connection is successful
4 —controller will auto reconnect to your macOS device with the press of start once it has been paired
• USBconnection: connect the controller to your macOS device via USBcable after stepl
macOS
1. start] 2,
2. [pair] 2 F), 1
Menu
ooo
left joystick
Turbo function
x
RI
3. macOS ißålä*, [Wireless Controller] i+å,
4. [start]
* USB 1 USB
ooo
Turbo
' switch
• 480mAh 18
- C 1-2
-H-*JIÉ 1 15
* [start]
' USB
* ißifitö] http://support.8bitdo.cn/
x
RI
1—hold the button you would like to set turbo functionality to and then press the star button to
activate/deactivate its turbo functionality
• d-pad and analogue sticks are not included
• this does not apply to Switch
battery
status —
low battery mode
battery charging
LED indicator —
red LED blinks
red LEDstays solid
batteryfullycharged LEDturnsoff
• built-in 480 mAh Li-on with 18 hours of playtime
• rechargable via USB-Ccable with 1—2 hour charging time
power saving
• Sleep mode - 1minute with no Bluetooth connection,
• Sleep mode -15 minutes with Bluetooth connection but no use
• press start to wake up your controller
• controller stays on and connected on wired IJSB connection
support
• please visit support.8bitdo.com for further information & additional support
Need help?
General
