8BitD0
Pro 2 Bluetooth gamepad —instruction manual
- select
d-pad
profile LED
L3
star
pair power LED
+ start
R3
home
home
LED
8BitD0
Pro 2 -
- select
L3
[start]
* [start]
Switch
NFC HD
2. [start]
+ start
R3
home
home
profile
mode switch
S.A.D.X
status LED
• press hold start for 3 secondsto turn off the controller
• press start to turn on the controller
Switch
S.A.D.X
• NFCscanning, IRcamera, HDrumble, notification LEDare not supported, nor can the system be waken
up wirelessly
Bluetooth connection
1 —turn the mode switch to S
2 —press start to turn on the controller. LEDstarts to rotate from leftto right
3 —press pair button for 3 seconds to enter its pairing mode. LEDstops blinking for a short moment then
starts to rotate again (this is required for the very first time only)
4 —go to your Switch Home Pageto click on Controllers, then click on Change Grip/Order
5 — LED becomes solid when connection is successful
• controller will auto reconnect to your Switch with the press of start once it has been paired
wired connection
1 —turn the mode switch to S
2 —press start to turn on the controller. LEDstarts to rotate from leftto right
3 —connect the controller to your Switch dock via its USBcable
4 —wait till the controller is successfully recognized by your Switch to play
• Switch system needs to be 3.0.0 or above for wired connection. Goto System Setting > Controller and
Sensors > turn on Pro Controller Wired Communication
• LEDlights indicate the player number, 1 LEDindicates player 1,2 LEDsindicate player 2, 4 is the maximum
number of players the controller supports
Windows CX- input)
Bluetooth connection
• required system: Windows 10 (1703) or above. Bluetooth 4.0 is supported
1 —turn the mode switch to X
2 —press start to turn on the controller. LEDs1& 2 startto blink
3 —press pair button for 3 seconds to enter its pairing mode. LEDstarts to rotate from leftto right (this is
required for the very first time only)
4 —go to your Windows Settings > Devices > Bluetooth&other devices >turn it on
5 — choose Add Bluetooth or other device - Bluetooth
6 —pair with [8BitDo Pro 2]
7 — LED becomes solid when connection is successful
• controller will auto reconnect to your Windows device with the press of start once it has been paired
wired connection
1 —turn the mode switch to X
2 —press start to turn on the controller. LEDs1& 2 start to blink
3 —connect the controller to your Windows device via its USBcable
4 —wait till the controller is successfully recognized by your Windows device to play
• LEDlights indicate the player number, 1LEDindicates player 1, 2 LEDs indicate player 2, 4 is the maximum
number of players the controller supports
Android CD- input)
• required system: Android 4.0 Or above
Bluetooth connection
1 —turn the mode switch to D
2 —press start to turn on the controller. LEDI starts to blink
3 —press pair button for 3 seconds to enter its pairing mode. LEDstarts to rotate from leftto right (this is
required for the very first time only)
4 —go to your Android device's Bluetooth setting, pair with [8BitD0 Pro 21
5 — LED becomes solid when connection is successful
• controller will auto reconnect to your Android device with the press of start once it has been paired
wired connection
1 —turn the mode switch to D
2 —press start to turn on the controller. LEDI starts to blink
3 —connect the controller to your Android device via its USB cable
4 —wait till the controller is successfully recognized by your Android device to play
• OTGsupport is required on your Android device
macOS
• required system: OSX Lion (10.10) or above
Bluetooth connection
1 —turn the mode switch to A
o
2 —press start to turn on the controller. LEDs1& 2 & 3 start to blink
3 —press pair button for 3 seconds to enter its pairing mode. LEDstarts to rotate from left to right (this
is required forthe very first time only)
4 —go to your macOS device's Bluetooth setting and turn it on
5 —pair with [Wireless Controller]
6 — LED becomes solid when connection is successful
• controller will auto reconnect to your macOS device with the press of start once it has been paired
wired connection
1 —turn the mode switch to A
2 —press start to turn on the controller, LEDs1,2 & 3 start to blink
3 —connect the controller to your macOS device via its USB cable
4 —wait till the controller is successfully recognized by your macOS device to play
Turbo function
1— hold the button you would like to set turbo functionality to and then press the star button to activate
its turbo functionality
2 —home LED blinks continuously when the button with turbo functionality is pressed
3 —hold the button with turbo functionality then press star to deactivate its turbo functionality
• D-pad joysticks, home, select and start buttons are not included
• This does not applyto Switch mode
battery
status —
low battery mode
battery charging
battery fully charged
LED indicator —
red LED blinks
red LEDstays solid
red LED turns off
• 20 hours of playtime with a1000 mAh built-in battery pack
• rechargeable with 4 hours charging time
• replaceable with two AAbatteries with 20 hours of playtime
• controller will turn offin 1 minute with no connection and 15 minutes with Bluetooth connection but no use
• controller stays on with Wired connection
Ultimate Software
• It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger
sensitivity, vibration control and create macros with any button combination
• please visit support.8bitdo.com/ultimate-software.html for the application
support
• please visit support.8bitdo.com for further information & additional support
4. Switch "*tfi" it-IA, / Illß"a
[start]
2. [start]
3. USB switchæ*J1fi USB
4.$6 Switch
• Switch 3.0.O "iQX" -
- "Pro "-HE"
1 1.2
Windows (X - input)
* Windows Windows 10 (1703) 4.00
2. [start]
4. Windows iQå "FFfiiQH" "iQå" - ,
6. 8BitD0 Pro 2
7.
• [start]
2. [start] 1.2
3. USB Windows iAå$J USB
4. Windows
Android CD- input)
• Android Android 4.0
2. [start] 1
4. Android "k*" ith, 8BitDo Pro 2
• [start]
2. [start] 1
3. USB Android USB
4. Android
macOS
macOS OS X Lion (10.10)
2. [start]
4. macOS iQå -
5. Wireless controller
6.
[start]
2. [start]
3. USB macOS iQåfi USB
4.*6 macOS
Turbo
2. [home]
3. [home]
/ [home]. [start]
• jsæswitch
1000 mAh 20
it!!) 20
• 1 15
• iåi$fä] support.8bitdo.cn/ultimate-software.html
support.8bitdo.cn
Need help?
General
