Need help?Do you have a question about the 909 BN210 and is the answer not in the manual?
Recycling unwanted materials and disposing of tools and packaging safely.
Explanation of symbols on the tool's rating plate for safe operation and standards.
Technical details: input power, speed, blade size, mitre/bevel angles, weight.
Keep work area clean, well-lit, and free of children/bystanders.
Use correct plugs, avoid wet conditions, protect cords, use RCD.
Stay alert, use PPE, prevent accidental starts, dress properly.
Guidance on proper usage, maintenance, and safe operation of the power tool.
Voltage, double insulation, guards, lighting, operator age, material restrictions.
Rules for fixing to bench, standing position, blade condition, clamps, and sawdust removal.
Guidelines for using recommended blades, sharpening, trenching, and carrying the saw.
List of items supplied with the 909 BN210 Compound Mitre Saw.
Diagram and list of parts for the 909 BN210 Compound Mitre Saw.
Instructions for removing the saw and its parts from the carton.
How to safely lift and move the mitre saw.
Instructions for securely fixing the saw to a workbench or mounting base.
Explanation of the release knob's purpose for transport and storage.
How to set and secure the mitre angle using the table locks.
How to set and secure the bevel angle using the bevel lock.
How to use the button to lock the spindle for blade changes.
Explanation of the guard's protective function during cuts.
Instructions for operating the on/off trigger switch.
Procedure to ensure the blade is perpendicular to the mitre table.
Calibrating the bevel scale to show the correct 0° reading.
Procedure to ensure the fence is perpendicular to the saw blade.
Calibrating the mitre scale to show the correct 0° reading.
Step-by-step guide for safely removing and installing a new saw blade.
Fitting the new blade, checking rotation, tightening and guard function.
Steps for setting mitre angle and cutting across the grain.
Definition and procedure for making a bevel cut with the mitre saw.
Steps for setting mitre and bevel angles and cutting.
Steps for setting mitre and bevel angles for complex cuts.
Instructions for replacing the power supply cord safely.
Guidance on cleaning air vents, removing dust, and lubricating parts.
Regular checks for tightness of screws and overall condition.
To Next Page
General
