Need help?Do you have a question about the 909 255SB and is the answer not in the manual?
Guidelines for responsible disposal of unwanted materials and packaging.
Explains the various symbols found on the tool's rating plate and their meanings.
Details the technical data, including power, speed, and dimensions of the mitre saw.
Ensures a safe and organized workspace to prevent accidents and hazards.
Guidelines for preventing electric shock and hazards related to power sources.
Operator precautions for preventing injuries during use, including alertness and protective gear.
Recommendations for wearing safety goggles, earmuffs, and breathing masks.
Steps for safely removing the saw from its packaging.
Safe procedures for moving the mitre saw, emphasizing locking the arm.
Instructions for securely attaching the saw to a stable work surface.
Details the function and use of the release knob for securing the saw arm.
Explains the purpose and operation of the slide lock mechanism.
How to lock the mitre table at desired angles for accurate cuts.
Procedure for setting and securing the blade at the desired bevel angle.
Instructions for mounting and securing the workpiece clamp.
How to use the spindle lock button for blade changes.
Description of the blade guard and its protective function.
Instructions for attaching and maintaining the dust collection bag.
How to attach side bars for supporting long workpieces.
Procedure for adjusting the depth of cut for trenching operations.
How to start and stop the mitre saw using the switch trigger.
Instructions for activating and using the laser guidance system.
Procedure to ensure the mitre table is perfectly square to the blade.
How to adjust the fence to be square with the mitre table.
Detailed steps for safely replacing the saw blade.
How to perform crosscuts on narrower pieces without using the slide.
Procedure for making crosscuts on wider workpieces using the slide.
Instructions for making angled cuts using the bevel function.
How to perform cuts involving both mitre and bevel angles.
Procedure to align the laser line with the saw blade's cutting path.
Guidelines for using the laser for accurate workpiece alignment.
General advice on keeping the tool in good working order.
Information on replacing the power cord safely.
Recommended methods for cleaning the tool and its parts.
Regular checks for tightness of screws and fixings.
To Next Page
General
