Need help?Do you have a question about the 909 10CSMS and is the answer not in the manual?
General| Model | 909 10CSMS |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Power Source | Corded Electric |
| Blade Length | 10 inches |
| Motor Power | 15 amps |
| No Load Speed | 5000 RPM |
| Voltage | 120 V |
Details regarding the warranty for 909 Power Tools.
Overview of the 909 power tool and its features.
Guidelines for responsible disposal and important safety warnings.
Explanation of symbols found on the tool's rating plate.
Detailed technical data including input power, speed, and dimensions.
Specific safety precautions for operating the laser guidance system.
Additional safety guidelines for operating the miter saw.
Recommended protective gear for safe operation of the saw.
Critical information regarding proper grounding and electrical connections.
Ensuring proper grounding for electrical safety.
Guidelines for selecting appropriate extension cords for the tool.
List of standard accessories supplied with the miter saw.
Identification and description of all parts of the saw.
Procedures for safely unpacking and checking the new saw.
Safe methods for moving and securing the saw.
Guidance on securely mounting the saw to a workbench.
How to set and lock miter and bevel angles.
Details on clamp, spindle lock, and blade guard operation.
Connecting the dust bag and attaching side support bars.
How to adjust the cutting depth for trenching.
Instructions for operating the saw and laser system.
Procedure to ensure the table is perpendicular to the blade.
Aligning the fence perpendicular to the miter table.
Step-by-step guide for replacing the saw blade.
How to perform standard 90-degree and miter crosscuts.
Technique for cutting wider workpieces using the slide feature.
Cutting wood at an angle to the table surface.
Combining miter and bevel angles for complex cuts.
How to calibrate the laser to align with the blade.
Instructions for utilizing the laser for accurate cutting.
General warnings and procedures for maintaining the tool.
Care for the power cord and cleaning the tool.
Regular checks to ensure all fixings are tight.
To Next Page
