Introduction 3
Description of symbols 3
Specifications 3
General safety rules 4
Additional safety rules for belt & disc sanders 5
Unpacking 6
Accessories 7
Know your product 8
Getting to know your belt and disc sander 9
Mounting belt and disc sander to workbench 9
Installing sanding disc and guard 9
Installing work support 9
Installing table assembly 10
Auxiliary mounting for vertical sanding 10
Removing the belt 11
Turning on and off 11
Basic operation 11
Positioning belt bed 12
Surface sanding on the sanding belt 12
End sanding on the sanding belt 12
Sanding curved edges 12
Sanding small end surfaces on the sanding disc 13
Maintenance 13
Power cord maintenance 13
General inspection 13
Repairs 13
To Next Page
Loading...