Need help?Do you have a question about the a/d/s/ P4100 and is the answer not in the manual?
Guides users on how to best utilize the manual for installation and setup procedures.
Details recommended impedance loads for various speaker configurations in stereo and bridged modes.
Recommendations for under-seat mounting and required clearance for adequate airflow.
Advice on vertical or horizontal mounting for effective cooling and avoiding cargo damage.
Strong warning against mounting in the engine bay due to harsh chemical and heat environments.
Proper wiring for power supply and ground connections, including fuse installation requirements.
Guides on connecting speakers for stereo operation, specifying impedance requirements.
Guides on connecting speakers for bridged operation, specifying impedance requirements.
Step-by-step guide on setting input sensitivity for optimal performance and minimizing system noise.
General| Power Output | 100W x 4 |
|---|---|
| Total Harmonic Distortion | 0.05% |
| Frequency Response | 10Hz - 30kHz |
| Channels | 4 |
| RMS Power at 4 Ohms | 100W x 4 |
| RMS Power at 2 Ohms | 150W x 4 |
| Bridged RMS Power at 4 Ohms | 300W x 2 |
| Crossover Frequency | 50Hz - 500Hz |
| Crossover | Variable high-pass/low-pass |
| Input Impedance | 20kΩ |
| Bass Boost | +12dB @ 45Hz |
| Input Sensitivity | 200mV |
To Next Page
