Need help?Do you have a question about the a/d/s/ P640 and is the answer not in the manual?
Crucial safety warning about potential permanent hearing damage from sustained listening to loud music.
Essential safety precaution to disconnect the vehicle's battery ground before performing any work.
Safety advice recommending the use of eye and ear protection when operating power tools.
Critical safety check for hidden vehicle components like wiring or brake lines before making holes.
Warning against tampering with fuses, as repeated blowing indicates a problem.
Requirement for an inline fuse on the 12V supply line, located near the battery.
Safety warning stating that an unmounted amplifier can become a dangerous projectile during accidents or sudden stops.
Mounting restrictions advising against exposure to elements that could damage the unit.
Mounting guidelines for proper cooling, recommending vertical or upward fin orientation.
Safety procedure emphasizing that the system must be powered off when making or breaking connections.
Specific speaker wiring caution to avoid connecting speaker terminals to the chassis or frame.
Strong warning against mounting the amplifier in the engine bay due to harsh chemical and heat environments, which voids the warranty.
Critical first step for safe installation, requiring reconnection only after all wiring is checked.
Instructions for routing the power wire from the battery, including fuse placement.
Guidance on securing a proper ground connection near the mounting location.
Final connection step after all wiring is completed and checked.
Verifying all settings and connections before powering on the system.
Initial power-up and verification of channel connections and speaker output.
Tuning the amplifier's performance by adjusting input levels and crossover points.
Initial step for calibrating input levels, starting with amplifier controls at minimum.
Final verification of audio levels to ensure no distortion and maximum system output.
To Next Page
General