The Smarty Saver Series is a line of automated external defibrillators (AEDs) designed for use by both lay personnel and healthcare professionals who have completed a BLSD (Basic Life Support and Defibrillation) course. The device is intended for use on patients who are unconscious, not breathing, and have no heartbeat. As a life-saving device, the AED must always be available and ready for use, requiring the battery to be continuously connected.
Function Description
The Smarty Saver Series AEDs are designed to analyze cardiac rhythm and deliver an electrical shock if necessary, followed by guidance for cardiopulmonary resuscitation (CPR). The series includes three main models: Smarty Saver, Smarty Saver Plus, and Smarty Saver Geo, each offering semi-automatic or fully automatic operation.
Core Functions:
- Cardiac Rhythm Analysis: The device analyzes the patient's heart rhythm to determine if a shockable rhythm is present.
- Defibrillation Shock Delivery: In semi-automatic models, a shock button is pressed to deliver the defibrillation. In fully automatic models, the shock is delivered automatically after a voice warning.
- CPR Guidance: The device provides voice prompts and visual feedback (especially in Plus and Geo models) to guide the user through chest compressions and ventilations (30 compressions followed by 2 insufflations). A metronome helps maintain the correct compression rate and depth (5-6 cm).
- Patient Selection: Dedicated buttons or selectors allow the user to choose between adult and pediatric modes, ensuring appropriate energy levels and guidance for universal pads.
- Emergency Call (Geo models): Smarty Saver Geo models feature a "VIVO call button" to initiate a hands-free phone call to a pre-memorized emergency response number.
- ECG Streaming (Geo models): Smarty Saver Geo models can send ECG streaming data to the AMISAVERCLOUD platform via a "Key Stream" button.
Important Technical Specifications
The Smarty Saver Series AEDs deliver a maximum energy of 200J.
Models and Features:
- SM1-B1001 (Smarty Saver Semiautomatic): Maximum deliverable energy 200J.
- SM2-B1002 (Smarty Saver Fully Automatic): Maximum deliverable energy 200J.
- SM3-B1003 (Smarty Saver Plus Semiautomatic): Maximum deliverable energy 200J. Includes external CPR Quality Module (SMT-C14034) for feedback on compression depth and frequency.
- SM4-B1004 (Smarty Saver Plus Fully Automatic): Maximum deliverable energy 200J. Includes external CPR Quality Module (SMT-C14034).
- SM5-B1005 (Smarty Saver Geo Semiautomatic): Maximum deliverable energy 200J. Includes external CPR Quality Module (SMT-C14034) and Geo functionality (emergency call, ECG streaming).
- SM6-B1006 (Smarty Saver Geo Fully Automatic): Maximum deliverable energy 200J. Includes external CPR Quality Module (SMT-C14034) and Geo functionality.
Components:
- Defibrillator Unit: The main device housing the controls, display, and internal electronics.
- Disposable Battery (SMT-C14031 for Saver/Plus, SMT-C14032 for Geo): Single-use batteries that must always be connected for the device to be ready.
- Universal Electrodes (SMT-C2001/SMT-C2002): Pre-connected pads for adult and pediatric use. SMT-C2002 offers face-to-face pre-connected electrodes.
- External CPR Quality Module (SMT-C14034): Optional for Saver, standard for Plus and Geo models. Connects via Bluetooth to measure and provide feedback on CPR compressions.
- Carrying Case: For transport and protection of the device.
- User Guide: Comprehensive manual for detailed information.
Indicators and Controls:
- ON/OFF Button: To switch the device on and off.
- Pediatric/Adult Mode Selectors: Buttons to choose the patient type.
- "Place the PADs" Icon: Visual prompt to apply electrodes.
- "Don't touch" Icon: Warning to avoid touching the patient during analysis or shock delivery.
- Shock Button (Semiautomatic models): To deliver the shock. Replaced by an "auto shock" icon in fully automatic models.
- CPR Icon: To initiate cardiopulmonary resuscitation guidance.
- Green Control LED: Indicates "ready to use" status in stand-by mode.
- Red Control LED: Indicates "error status" in stand-by mode.
- PADs Connector Port: Where the electrode pads are plugged in.
- Smarty Saver Microphone/Speaker: For voice prompts and recording.
- Battery Compartment: Houses the disposable battery.
- SD Memory Card and USB Slot: For data storage and updates.
- "Key Stream" Button (Geo models): To send ECG data to the cloud.
- "Remote LED" LED (Geo models): Indicates device operation, ECG streaming, Bluetooth connection with Q-CPR module, or software update status.
- "VIVO call button" (Geo models): To initiate a hands-free emergency call.
- SIM Card Slot (Geo models): For cellular connectivity.
CPR Quality Feedback (Plus and Geo models with SMT-C14034):
- LED Scale with Progressive Lighting: Provides visual feedback on compression quality.
- Red LED: Insufficient or excessive pressure.
- Red and Orange LED: Pressure not yet sufficient.
- Red, Orange, and Yellow LED: Almost sufficient pressure.
- Red, Orange, Yellow, and Green LED: Correct pressure.
Usage Features
-
Start of Rescue:
- Call emergency services.
- Turn on the device.
- Connect the battery (if not already connected).
- The device performs an automatic start-up test and provides voice messages.
- Follow voice prompts.
- Prepare the patient (e.g., expose the chest).
-
Electrodes Position:
- Plug in the PADs connector and select the patient type (adult or pediatric).
- Open and remove covers from the electrodes.
- Apply electrodes to the patient's chest as indicated by the device.
-
Analysis and Shock:
- The device performs cardiac rhythm analysis.
- If a shock is required:
- Semi-automatic: Press the shock button when instructed.
- Fully automatic: The device delivers the shock automatically after a warning voice message.
-
Cardiopulmonary Resuscitation (CPR):
- Perform 30 chest compressions (5-6 cm depth). A metronome guides the rhythm.
- Practice 2 insufflations (1 second each).
- The CPR Quality Module (for Plus and Geo models) provides real-time feedback on compression depth and frequency via an LED bar.
-
Geo Functionality (Smarty Saver Geo):
- Hands-Free Call: Press the "VIVO call button" to connect to a pre-programmed emergency number.
- ECG Streaming: Press the "Key Stream" button to send ECG data to the AMISAVERCLOUD platform. The "Remote LED" indicates the status of this transmission.
Maintenance Features
- Routine Maintenance: It is advisable to perform daily routine maintenance.
- Visual Inspection: Check the device's physical condition.
- Control LED Check: Verify that the green LED is flashing, indicating the device is ready for use.
- Pads Expiration Check: Ensure the electrode pads are within their validity period.
- Battery Management: The disposable battery must always be connected to ensure the AED is ready. The device provides warnings for low battery levels, prompting replacement.
- Faulty Device: If the red control LED indicates an error, or if the device reports a fault, contact the service department.
- Software Updates (Geo models): The "Remote LED" can indicate when a software update is in progress.
- User Manual: Refer to the comprehensive user manual for detailed information on maintenance, troubleshooting, and specific functionalities. The manual is downloadable from www.amiitalia.com.
- Product Registration: Users are encouraged to register their device on www.amiitalia.com to ensure correct traceability and receive information about updates.
Need help?
General
To Next Page