2
1
NEED HELP? GIVE US A CALL 877.333.7108
STEP 4 Install Inlet Tee Valve and Tubing
Note: Ensure water valve is turned off before continuing.
1. Place a pan or bucket under cold water line to catch any excess water. With an
adjustable wrench, disconnect COLD water line from the 1/2" threaded stem on
the bottom of the kitchen faucet.
2. Attach threaded ends of inlet tee valve to the COLD water line of the shut-off
valve. Tighten with wrench. Do not over tighten.
3. Push white tubing into the open quick connect valve. Ensure inlet tee valve is in
the open position.
CLOSED OPEN
STEP 5 Install System Manifold
1. Place system manifold under the sink
in a place that will be easy to access for
scheduled lter changes. Do not install
lter cartridges at this time.
INSTALLATION GUIDE
4
To Next Page
Loading...
Need help?
General
