To Next PageTo Next Page
Need help?Do you have a question about the A.O. Smith Z7 and is the answer not in the manual?
General| Brand | A.O. Smith |
|---|---|
| Model | Z7 |
| Category | Water Filtration Systems |
| Language | English |
Details the 7 stages of water purification for enhanced purity and mineral balance.
Provides purified hot water at two temperature choices (45°C & 80°C) at the press of a button.
Details safety alert symbols (DANGER, WARNING, CAUTION) and general safety precautions for operation.
Crucial instructions before installation, including checking for damage and verifying voltage supply.
Indicates the need to replace MIN-TECH, Post Carbon, SCMT, and RO membrane filters based on remaining life.
Signals the need to replace Sediment and Pre Carbon filters based on remaining life.
Emphasizes using a grounded 230V outlet and avoiding wet hands when handling the power plug.
Advises against moving the product while running and installing it away from direct sunlight.
Stresses that installation must be performed only by an authorized A. O. Smith service technician.
Warns against connecting hot water and using only the provided plug for power supply.
Instructs to switch off and unplug immediately if the power cord is damaged or unusual signs appear.
States that opening the purifier for cleaning or part replacement must only be done by authorized technicians.
Advises against placing heavy objects on the product or inserting foreign objects/hands inside.
Warns that reject water should not be consumed in any form.
Steps for turning on the water connection via the ball valve for both models.
Instructions for switching on the power supply and pressing the power button to start operation.
How to dispense normal water by pushing the faucet lever on the Z6 model.
Steps to set and heat water to 80°C by pressing and holding the water heating button.
Steps for dispensing hot water on the Z7 after disabling the child lock.
Explains alarms for water leaks and overflows, and recommended actions.
Addresses low pressure alarms and RO filter change indications.
Covers SCPA filter change alerts and specific error codes (E1-E5) with their solutions.
Details the one-year warranty on electrical and functional parts and customer responsibilities.
Lists conditions not covered by warranty, such as misuse, unauthorized repair, and accessories.
Clarifies warranty validity within network coverage and force majeure events.
Specifies parts like plastic, cosmetic elements, consumable filters, and damage due to improper installation.
Outlines warranty periods for RO membrane based on TDS and hardness.
Conditions for RO membrane warranty, including timely filter replacement and usage.
