EasyManua.ls Logo

A.O. Smith Z7 - Warranty and Filter Change Recommendations; Filter Replacement Schedule

A.O. Smith Z7
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: Please go through detailed warranty terms and conditions mentioned on Page No. 33 to 36.
29
Parameter Limits
Total Dissolved Solids (TDS) Up to 2000 ppm
Total hardness Up to 500 ppm
Turbidity Up to 5 NTU
Iron 0.3 ppm (max.)
Feed water pressure 7 psi to 30 psi
Feed water temperature 5°C to 45°C
RECOMMENDED FEED WATER QUALITY
Recommended input Feed water quality for the optimum
performance of your product
Warranty details/Recommended filter change:
Pre-filter change:
The Pre-filter needs to be replaced at 200 hrs or approximately after 2,500 litres
of purified water. Depending on the quality of the feed water the Pre-filter may
even be changed earlier than 200 hrs.
Sediment and Pre Carbon filters change:
The Sediment and Pre Carbon filters need to be replaced at 200 hrs or
approximately after 2,500 litres of purified water.
MIN-TECH, Silver Activated Post Carbon and SCMT filters change:
MIN-TECH, Silver Activated Post Carbon and SCMT filters need to be replaced at
400 hrs or approximately 6,000 litres of purified water.
RO Membrane change:
As per the warranty, the RO membrane needs to be replaced at 400 hrs
(approximately 6,000 litres purified water) or 800 hrs (approximately 12,000 litres
purified water) depending on the quality of the feed water.

Related product manuals