Need help?Do you have a question about the A.O. Smith AO-US-200 and is the answer not in the manual?
General| Model | AO-US-200 |
|---|---|
| Filtration Method | Reverse Osmosis |
| Operating Temperature | 40-100°F |
| Category | Water Filtration System |
| Flow Rate | 0.75 gallons per minute |
| Removes | Chlorine, lead, cysts |
| Operating Pressure | 40-100 psi |
| Filter Life | 6 months |
| Warranty | 1 year limited |
Connect the brass tee to the cold water supply shutoff valve.
Attach white tubing to the brass tee using nuts and inserts.
Mount the faucet onto the sink with washers and secure it.
Connect the water supply tubing to the faucet base with nuts and inserts.
Mount the filter unit to the wall using anchors and screws.
Attach the filter sumps to the unit housing by aligning and turning.
Connect tubing from the brass tee to the inlet and faucet to the outlet.
Turn on water, check for leaks, and flush the cartridge for 10 minutes.
Wipe the unit with a damp cloth; use only cold water and check for leaks.
Covers defects in materials or workmanship in manufacturing.
Excludes filter cartridges and products not installed correctly or abused.
Contact A. O. Smith by phone or online within the warranty period.
To Next Page
