4. Take picture
5.1 Taking a still picture:
1) Turn on the Car DVR; the default mode is Video, press MODE to switch to Photo mode.
2) Short press OK to capture the image.
5.2 PHOTO Mode setting:
Under Photo mode, press MENU to get into Sub-selections for PHOTO setting as following. Select the options
by UP or DOWN, confirm by pressing REC; meanwhile settings finished and short press MENU to exit menu.
Sub-selections PHOTO setting:
Capture Mode: Select [Single / 2S Timer / 5S timer / 10S timer]
Resolution: Select [12M (4000*3000) / 10M(3648*2736) / 8M(3264*2448) /5M(2592*1944) /
3M(2048*1536) / 2MHD(1920*1080) / 1.3M(1280*960) / VGA (640*480) ]
Sequence: Select [On / Off]
Quality: Select [Fine / Normal / Economy]
Sharpness: Select [Strong / Normal / Soft]
White Balance: Select [Auto / Daylight / Cloudy / Tungsten / Fluorescent]
Color: Select [Color / Black & White / Sepia]
ISO: Select [Auto / 100 / 200 / 400 ]
Exposure: Select [+2.0 / +5/3 / +4/3 / +1.0 / +2/3 / +0.0 / -1/3 / -2/3 / -1.0 / -4/3 / -5/3 / -2.0]
Face Detection: Select [Off / Face Detection / Smile Detection]
Anti-Shaking: Select [On / Off]
Quick Review: Select [Off / 2 Seconds / 5 Seconds]
Date Stamp: Select [Off / date / Date/time]
5. Playback your video / picture files
Turn on your DVR. Under Video mode, press MODE twice to enter into playback mode, then you can see
video files. Select the video files by UP or DOWN, press OK to playback video, press OK again to pause,
press MODE to stop playback video.
In Playback mode, press MENU to get into Sub-selections for PLAY setting:
Delete: [Delete Current/ Delete All]
Protect: [Lock current / unlock current / lock all / unlock all]
Press menu button to turn back
To Next Page
Loading...