A-T Controls Triac TMC-4 - Input; Output Signal Configurations


TMC-4 Control Card
for Electric Actuators
Installation & Maintenance Manual
8 04/06/22
www.atcontrols.com IOM08139 REVISION 04
2.3. Input / Output Signal Configurations
Command Type = mA Sinking
Externally Powered Loop Control
Command Type = mA Sinking
2-Wire Transmitter Control
Command Type = 5V and 10V Command Type = Potentiometer
Command Type = On-Off
Externally Powered Inputs
Command Type = On-Off
Using TMC-4 +24V Output
Feedback = mA or V