Need help?Do you have a question about the a-them mrx 1120/720 and is the answer not in the manual?
Details FCC requirements, modifications, RF exposure compliance, and product identification for North America.
Details Industry Canada requirements, antenna gain, and RF exposure limits for Canadian customers.
States compliance with EC/EU directives, including R&TTE, and notices on product modification and separation distance.
Lists places to avoid for optimal performance and safety, such as direct sunlight, heat sources, humid areas, etc.
Provides specific safety instructions for UK customers regarding the power plug and fuse.
Advises on proper disposal of electronic equipment and recycling at the end of its useful life.
Provides information on battery disposal according to EU directive 2006/66/EC for European customers.
Details the terms of GNU GPL, LGPL, BSD, MIT/X, AFL, OpenSSL, and other licenses for included software.
Lists items to check upon receipt and what to retain for warranty service.
Advises on disconnecting power before component changes and allowing units to reach room temperature.
Identifies and describes the function of each button, display, and jack on the front panel.
Details all input/output connectors on the MRX 720 rear panel, including FM antenna, wireless antennas, HDMI, network, audio, and speaker terminals.
Details all input/output connectors on the MRX 1120 rear panel, including FM antenna, wireless antennas, HDMI, network, audio, and speaker terminals.
Details all input/output connectors on the AVM 60 rear panel, including FM antenna, wireless antennas, HDMI, network, audio, and balanced outputs.
Explains the function of each button on the remote control, categorized by function (power, volume, setup, navigation, etc.).
Illustrates various speaker placements for different configurations like in-ceiling and Dolby-enabled speakers.
Explains how to connect video sources via HDMI and MHL, emphasizing HDCP compliance and certified cables.
Describes connecting digital (HDMI, coaxial, optical) and analog audio sources and preamp outputs.
Explains line output for headphone amps and Zone 2 operation with independent source selection or follow main.
Discusses using coax/optical connections as alternatives to HDMI for audio, especially for Dolby Digital and DTS.
Provides detailed instructions for connecting speakers using binding posts, including polarity and impedance considerations.
Details connecting the FM antenna and wired/wireless network connections for ARC, Play-Fi, and IP control.
Covers 12V trigger output for system component activation and IR input for remote control extension.
Explains how to navigate the setup menu using front panel or remote controls, including entering/exiting and selecting options.
Lists the primary categories available in the setup menu, such as Speaker Setup, Bass Management, and Input Setup.
Guides on setting up speakers, speaker placement, and reassigning amplifier channels for different configurations.
Details how to configure and name speaker profiles, including settings for subwoofer, center, surround, and height speakers.
Explains the role of the subwoofer in surround sound and recommends its use with Anthem Room Correction.
Explains how to set bass management and crossover frequencies for different speaker types to optimize bass distribution.
Guides on measuring and entering listener-to-speaker distances for proper sound imaging and channel delay.
Explains using test noises and an SPL meter for matching speaker output levels, including Dolby Offset and Test Noise options.
Details calibrating channel levels by ear or with an SPL meter, and notes on subwoofer level reduction with ARC.
Provides guidance on balancing multiple subwoofers before system calibration and setting their input levels.
Describes how to add, delete, and reorder inputs, and configure Zone 2 input behavior.
Covers renaming inputs, selecting video/audio sources, and configuring Zone 2 input and analog processing.
Explains enabling Anthem Room Correction and configuring Dolby Volume for dynamic range control.
Describes various listening modes like AnthemLogic, Dolby Surround, and DTS Neo:6 for enhancing audio experience.
Details settings for volume limits, power-on volume/input, front panel brightness, and on-screen display.
Explains how headphone use affects pre-outs and how to prevent recorder feedback loops for line/digital outputs.
Guides on setting up wireless network connections, using the Play-Fi app for streaming, and device naming.
Details push-button, manual, and reset methods for wireless network connection.
Covers IP address settings (DHCP/Static) and configuring trigger outputs for component control.
Explains TCP port settings for conflict resolution and disabling/enabling front/rear IR inputs.
Details Auto Off, IP Control, Standby IP Control, and Standby HDMI Bypass settings for power management and control.
Explains Consumer Electronics Control (CEC) for system integration and setting FM tuner steps according to regional standards.
Covers saving user settings, resetting on-the-fly settings, loading factory defaults, and performing a system reset.
Guides on downloading and installing software updates via USB, including version numbering and ARC name/upload time.
Explains how ARC corrects room acoustics by measuring and equalizing speaker response, including correction range.
Lists prerequisites for ARC, including software compatibility, microphone response, computer requirements, and network setup.
Provides instructions for installing the ARC software from CD or downloaded files.
Details assembling the microphone stand, positioning the microphone, and ensuring proper height for accurate measurements.
Guides on connecting components, taking measurements, naming them, and disconnecting the computer after completion.
Explains using the Quick Measure feature to help position speakers, especially subwoofers, for optimal response before full measurement.
Describes using manual mode to measure, calculate, and upload targets, with options for editing targets for experienced users.
Discusses setting maximum EQ frequency, adjusting room gain, and managing multiple profiles with different settings.
Recommends using auto-detected settings for subwoofers unless advanced user understands technical capabilities.
Explains setting subwoofer high pass order, frequency, and minimum EQ frequency for fine-tuning bass response.
Instructs on how to print graphs and targets generated by the ARC software.
Explains how to power the unit on/off and adjust volume for the main zone and Zone 2.
Details how to operate Zone 2 from the front panel or remote control, including input selection and volume adjustment.
Describes selecting inputs using the front panel or remote, including on-screen lists and Zone 2 input changes.
Guides on changing FM stations, setting presets, and displaying station information using the remote.
Covers storing and recalling FM presets, and introduces DTS Play-Fi for music streaming.
Explains adjusting channel levels (surrounds, subwoofer, LFE) dynamically using the LEVEL control.
Details adjusting bass, treble, balance, and lip-sync for optimal audio-video synchronization.
Describes various listening modes like AnthemLogic, Dolby Surround, and DTS Neo:6 for enhancing audio experience.
Explains Dolby Volume and dynamic range controls (Normal, Reduced, Late Night) for adjusting audio passages.
Covers adjusting front panel display brightness and cycling through various info displays.
Outlines the warranty period, coverage, voiding conditions, and procedures for service in Canada and the USA.
To Next Page
General
