Need help?Do you have a question about the a-them AVM 60 and is the answer not in the manual?
Identifies and describes the buttons and indicators on the MRX 1120 front panel.
Identifies and describes the connectors and ports on the MRX 720 rear panel.
Identifies and describes the connectors and ports on the MRX 1120 rear panel.
Identifies and describes the connectors and ports on the AVM 60 rear panel.
Details the functions of each button on the remote control for the AVM/MRX.
Illustrates various speaker placement configurations for optimal sound.
Explains how to connect video sources via HDMI and MHL inputs/outputs.
Details digital and analog audio connection options for inputs and outputs.
Provides instructions for connecting speakers to the MRX receiver using binding posts.
Guides the user through configuring speaker types, positions, and amplifier assignments.
Explains bass management settings, including crossover frequencies for speakers and subwoofers.
Describes how to set speaker distances from the listening area for optimal sound imaging.
Guides the user on calibrating speaker output levels using test noises and an SPL meter.
Details how to adjust individual channel levels for balanced sound output.
Covers configuring input names, video/audio sources, and Zone 2 input behavior.
Explains how to select and configure various listening modes for enhanced audio playback.
Covers user preferences such as display brightness, mute level, and power-on settings.
Allows saving and recalling custom user configurations.
Restores all menu settings to their original factory defaults.
Guides on updating the unit's software via a USB flash drive.
Lists prerequisites and checks before starting the Anthem Room Correction process.
Provides instructions for installing the Anthem Room Correction software on a computer.
Guides on correctly positioning the microphone for accurate room measurements.
Explains the step-by-step process of running the Anthem Room Correction measurement.
Describes using the Quick Measure feature for initial speaker positioning adjustments.
Explains manual mode for ARC, allowing target editing and custom curve creation.
Covers advanced controls for customizing subwoofer response targets.
Explains how to power the unit on/off and adjust volume for main and zone 2.
Guides on selecting and changing audio/video inputs using the front panel or remote.
Explains Dolby Volume and dynamic range controls for adjusting audio playback.
To Next Page
General
