CHAPTER 1 INTRODUCTION
1-1 ATC-6130E Mainboard System Features
Intel Pentium
®
II CPU & Celeron
TM
CPU operating from 233MHz to 400MHz .
Intel 82440EX AGPset.
Two 3.3V 168-pin DIMM sockets in two banks of 64-bit wide path up to 256MB
SDRAM or 512MB EDO DRAM (with parity chip ECC support).
Built-in Switching Voltage Regulator.
Auto-detect CPU core voltage range from 1.8V to 3.5V.
One AGP slot, three 32-bit PCI slots with revision 2.1 and two 16-bit ISA slots.
Dual Master IDE connectors support Ultra DMA/33 (33MB/sec), up to four devices in
two channels for connecting of high capacity hard drive, CD-ROM, Zip, LS-120...etc.
Winbond 83977 high-speed Ultra Multi-I/O chipset.
USB (Universal Serial Bus) header supporting up to 127 peripheral devices.
AT style Keyboard Connector and PS/2 Mouse Header.
AT Power Connector and ATX Power Connector.
Infrared Transfer (IrDA TX/RX) Connection.
One FDC Port supporting two devices up to 2.88MB.
Two 16550A fast UARTs compatible Serial Ports.
One EPP/ECP Mode Parallel Printer Port.
Fan On / Off Control, Power Button , Resume Reset and Modem Ring On ,Software
Power Off Control, Wake-On-LAN, Keyboard & PS/2 mouse Power On. (with ATX
power)
Built-in Hardware Health Monitoring. (option)
Intel LDCM software. (option)
Baby AT form factor, board dimension is 260mm x 220mm ( 8.66” x7.33” ).
To Next Page
Loading...
