a2b Galvani - 4.4 Error codes

14page
Error codes - overview
E-001: Under voltage
E-002: Motor stall
E-003: Over load
E-004: Over temperature controller
E-005: Over temperature motor
E-006: Over voltage
E-007: Not applicable
E-008: Hall sensor error
E-009: Torque sensor failure
E-0010: Offset torque sensor under limit
E-0011: Offset torque sensor over limit
4.4 Error codes
If the warning sign (!) is shown an error has oc-
curred. One of the following codes will be shown
on the display:
Error messages will automatically be reset if
the error ceases to occur. Please contact your
A2B dealer in case of a permanently displayed
error message.