a2b Galvani - Check your A2 B before every ride.

23page
owner´s manual
Check your A2B before every ride.
Do a ‘walk around’ of your A2B before every ride
checking brakes, tyres and the tightness of all the
important fasteners. Have your A2B checked by
an A2B dealer at LEAST once a year. Your safety
depends on the roadworthiness of your A2B .
• Reectors. Your A2B has reectors and to
make you more visible at night. Ensure they are in
place, properly positioned and clean before each
ride.
• Lights. Your A2B has a front light and rear tail
light to make you more visible at night. Ensure
they are functional and clean before each ride.
• Brakes. Check your brakes before each ride.
Right brake lever actuates the rear brake and the
left brake lever actuates the front brake.
• Brake Pads. When checking your brakes, it is
important to check the full brake system. Brake
Pads are subject to normal wear and tear and
over time wear down. Brake Pads should never
be worn down to their limit. Ask your A2B dealer
to check and replace brake Pads.
• Pedals. Ensure that your pedals are properly
installed and tight before each ride.
• Saddle. Ensure that your saddle is properly ad-
justed and tight before each ride (see 3.8).