6
Timer Functions
The MP-8000 is equipped with timer functions to match a wide variety of applications. The
hourly timer knob can be adjusted between 15 minutes and 4 hours, at any time interval
between.
• 15 minutes to 4 hours
• To operate this timer, turn the knob clockwise to the desired set position.
Continuous Timer
• A continuous option is available for the MP-8000.
• To operate this timer, turn the knob counterclockwise.
Note: You can control the MP-8000 with a Gorden timer. Just turn on all switches and
position timer to “ON”. Plug the unit to the timer (15 AMP) and set the timer to run
the unit. Be sure to set the timer to cool down the unit at least 2 hours between each
runtime.
To Next Page
Loading...
