Need help?Do you have a question about the A2Z Ozone SP-3 and is the answer not in the manual?
Crucial guidelines for safe installation and operation of the ozone generator.
Lists product features including Corona Discharge, LED indicators, amp meter, and output control.
Recommendations for pool size, required ozone output, and run-time for optimal performance.
Guidance on placing the ozone generator in a clean, dry, well-ventilated area away from direct weather.
Details on connecting the venturi injector manifold to the pool return line for ozone injection.
Instructions for connecting the unit to a properly rated and grounded receptacle, including GFCI protection.
Details on system running time for residential and commercial pools, and understanding water conditions.
Procedure for cleaning the ozone generator cabinet's air filter to prevent overheating and warranty voidance.
Information on the two check valves for the ozone delivery system and their recommended replacement.
Details on fuse type, location, and replacement for troubleshooting unit failure.
Information on safe ozone levels, detection, and potential health effects from exposure.
Diagram illustrating the typical installation of a venturi injector manifold for ozone delivery.
Frequently asked questions addressing ozone technology, its application, and benefits for pools and spas.
Steps and contact information required to initiate a warranty claim for defective products.
General| Brand | A2Z Ozone |
|---|---|
| Model | SP-3 |
| Category | Lighting Equipment |
| Language | English |
To Next Page