Need help?Do you have a question about the A2Z Ozone SP Series and is the answer not in the manual?
Read manual, follow installation, electrical safety, temperature limits, and chemical handling precautions.
Short term inhalation of high concentrations of ozone can cause serious harmful physiological effects.
Details on ozone output, power, size, and weight for SP-3G, SP-5G, SP-8G, and SP-16G models.
Indicates when the ozone generation process is active and functioning.
Shows if the unit is receiving power, indicated by a solid red light.
Controls the ON/OFF state of the ozone generator unit.
Adjusts the percentage of ozone produced by the unit using a control knob.
Displays the real-time electrical amperage usage of the unit.
Measures the suction amount created by the venturi, indicating flow in LPM.
Guidelines for selecting a clean, dry, well-ventilated location near the injection point.
Instructions for installing the venturi injector manifold into the plumbing system.
Connecting the SP Series unit to a properly rated and grounded electrical receptacle.
Connecting silicone and PTFE tubes for air/oxygen input and ozone output.
Installing check valves in the ozone delivery line to prevent water backflow.
Details on fuse location and amperage ratings for different models.
Recommended operating hours for residential and commercial pools.
Pre-treatment advice for water with high mineral content or cloudiness.
Using bromine as a residual disinfectant with the ozone system.
Using chlorine as a residual disinfectant for outdoor pools with ozone.
Recommended levels for bromine, chlorine, alkalinity, and hardness.
Maintaining chemical residuals and using algaecides for algae prevention.
Using chlorine shock treatment to assist ozone in cleaning water.
Diagram illustrating the injector manifold with venturi, check valve, and bypass valve.
Diagram showing venturi injector placement with a Hartford Loop for water return prevention.
Diagram illustrating the overall system flow from the SP Series to the swimming pool.
Procedure for cleaning the air intake filter for the cooling fan.
Importance of keeping the pool filter clean for ozone system effectiveness.
Inspecting and replacing check valves in the ozone delivery system yearly.
Details on fuse location and amperage ratings for different models.
Steps to test and identify the cause of ozone generator failure.
Advantages of ozone purification, including bacteria kill rate and chemical reduction.
Guidance on maintaining bromine residual when using ozone.
Explanation of how ozone gas is dissolved into pool water via a venturi injector.
Explains how ozone concentration reduces over time due to its short half-life.
How temperature and humidity affect ozone production and effectiveness.
Ensuring pool plumbing and materials are ozone-resistant.
Ozone is safe for humans and pets; it does not harm pH or water balance.
Ozone's effect on water balance, pH, and trace metal removal.
Recommendations for pump and filter operation duration for optimal water quality.
Explains potential cloudiness during initial ozone use due to particle oxidation.
Steps for backwashing, adjusting alkalinity, pH, and shock treating the pool.
Routine pool maintenance tasks including shock treatment and cleaning.
Checking non-return valves, silicone tubes, and air filters on the SP unit.
Factors influencing ozone effectiveness and how to determine adequate sanitation levels.
One-year limited warranty on A2Z Ozone Systems products, excluding labor and misuse.
Procedure for contacting A2Z Ozone and filing a warranty claim.
General| Brand | A2Z Ozone |
|---|---|
| Model | SP Series |
| Category | Lighting Equipment |
| Language | English |
To Next Page
