- 6 -
Software Instructions
How to Pair the Wireless Devices
The keyboard have been preset the ID Code in the factory. But under the circumstances you lose receiver or want to use with the other receiver
in the same product series, you need to refresh the ID Code before using it.
Step 1: Right click on the icon in the
taskbar and select
“Pair ID Program”
Step 2: Press “Start Pair ID” to
refresh ID Code.
Step 3: Remove the keyboard batteries and insert again in 15 seconds， 6 digits of
matching code will be displayed on the menu as shown “Keyboard Pair ID OK”.
To Next Page
Loading...
