6 McQuay OM 751
Introduction
Occupied Cooling Setpoint OCS
Occupied Heating Setpoint OHS
Occupancy Override Input OOI
Occupancy Sensor Input OSI
Proportional Integral PI
Parts Per Million PPM
Positive Temperature Coefficient PTC
Relative Humidity RH
Space Humidity Setpoint
RHS
Read Only RO
Read Write RW
Standby Cooling Setpoint SCS
Standby Heating Setpoint SHS
Thermal Expansion Valve TXV
Unoccupied Cooling Setpoint UCS
Unoccupied Heating Setpoint UHS
Unit Ventilator UV
Unit Ventilator Controller UVC
UVC (Heat/Cool) Mode Output UVCM
UVC State Output UVCS
Wet Heat Valve Position VALP
Ventilation Cooling Low Limit Setpoint VCLL
Ventilation Cooling Lockout VCLO
Ventilation Cooling Setpoint VCS
Wet Heat WH
Source (water in) Temperature Differential WITD
Description
Acronym/
Abr.
To Next Page
Loading...
Need help?
General