EasyManua.ls Logo

AAFIRST ArcticChill88 User Manual

Default Icon
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Power (1)
Dispensing (2)
Sensor (3)
Operating instructions for the contactless WCPC88CL
Installation
This product should be installed by a suitably qualified professional from the water industry. Please refer to the product manual for further instructions.
Operating instructions
1. Green power LED indicates power is on.
2. Orange LED will light up during dispensing.
3. To activate dispensing place your hand in front of the sensor <4cm.
4. To stop dispensing remove your hand.
5. This unit is programmed to allow a maximum dispense time of 6 seconds per dispense.
6. If you require more than 6 seconds of water simply, remove your hand and reactivate the sensor as per step 3.
7. In the event of a malfunction turn the power off and contact your supplier.
Important information
* CL88 not suitable for use in direct or indirect sunlight i.e. sunlight reflecting off a window/mirrored surface onto the sensor may result in unstable
performance/false actuation.
** Locating the cooler: Avoid facing the cooler towards external open doors or windows this may cause unstable performance.
*** Hi Vis material may activate dispensing when in proximity <1metre.
This cooler is fitted with a 10-litre alarmed drip tray overflow kit. In the event of the alarm sounding empty the jerry can, located inside the cooler.
Turn the power off to the cooler.
Remove the drip tray and then the lower front panel by pushing down and pulling out from the top.
Remove the Jerrycan from the shelf and empty. (To disable the alarm, remove one of the probes from the top of the Jerry can).
Reinstall the Jerrycan (and probes if removed) into the cooler on the shelf and ensure the drainpipe is connected to the jerry can opening.
Fix the lower panel and drip tray back on the cooler. Ensure the panel is fastened securely.
Turn the power back on.
Question and Answer IconNeed help?

Do you have a question about the AAFIRST ArcticChill88 and is the answer not in the manual?

AAFIRST ArcticChill88 Specifications

General IconGeneral
Cooling TechnologyCompressor Cooling
Dispensing MethodPush-button
MaterialStainless Steel
Heating Capacity5L/hour
Power Consumption500W
Dimensions330 x 330 x 980 mm
Weight15 kg

Summary

Contactless Dispenser Operation and Installation

Installation Guidelines

Professional installation by water industry experts is required for the unit.

Operating the Dispenser

Guide to using sensor activation, LEDs, and maximum dispense time.

Performance Considerations

Impact of sunlight, location, and proximity on sensor performance.

Drip Tray Overflow Kit Maintenance

Procedure for emptying the 10-litre alarmed drip tray overflow kit.

General Cooler Safety and Usage

Safety Cautions

Warnings for installation, electrical cords, and user supervision.

Safe Usage Practices

Recommendations for electricity, water, ventilation, and placement.

Commissioning Procedures

Steps for POU connection, sanitisation, and initial filling.

Technical Procedures and Maintenance

Converting Bottled Coolers to POU

Steps to convert a standard bottled cooler to a Point of Use system.

Sanitisation Procedures

Methods for sanitising coolers using hydrogen peroxide solution.

De-scaling Specific Models

Instructions for de-scaling Jazz, AA3300, and ArcticStar55 models.

POU Mains Connection and Filter Installation

Guide to connecting POU coolers to the mains water supply.

Advanced Cooler Management

De-Scaling ArcticSpring 100C

Procedure for de-scaling the ArcticSpring 100C boiler.

Troubleshooting Common Issues

Diagnosing and resolving common cooler malfunctions.

Hygiene and Electrical Safety

Guidelines for cooler sanitation and electrical checks.

POU Water Connections and Recycling

Mains connection requirements and WEEE recycling information.

ArcticStar 55 Model Specifics

Hot Water Booster Functionality

Instructions for boosting hot water temperature on the ArcticStar 55.

Cold Water Indicator

Explanation of the green LED for chilled water availability.

ECO Light Sensor Operation

Details on the ECO feature and how to disable it.

Initial Installation

Steps for initial unit setup, including heating switch and delay.

ArcticSpring 100C and Jazz 1000/1100 Details

ArcticSpring 100C Boiler and ECO Sensor

Information on the ArcticSpring 100C hot water boiler and ECO sensor.

ArcticSpring 100C Installation and Controls

Installation advice and guide to lights and buttons for the model.

Jazz 1000/1100 Specifications

Technical specifications for the Jazz 1000/1100 water dispenser.

Product Specifications and Models

3300/ArcticStar55 Specifications

Detailed specifications for the 3300 and ArcticStar55 models.

ArcticChill 88 Specifications

Technical details for the ArcticChill 88 water dispenser.

Additional Product Specifications

ArcticChill 98 Specifications

Technical specifications for the ArcticChill 98 water dispenser.

ArcticSpring 100C Specifications

Technical details for the ArcticSpring 100C Hot & Cold dispenser.

Related product manuals