2
1. INTRODUCTION
This manual describes how the AD-8127 Multi Printer work and how to get the most out of
them in terms of performance.
Read this manual thoroughly before using the printer and keep it at hand for future
reference.
1-1. Features
This device is a printer used to connect to a weighing device such as A&D’s
electronic balance, scale, counting scale, moisture analyzer, vibro viscometer or
weighing indicator and print out data transmitted from the weighing device.
With dot matrix printing, the printed contents can clearly and easily be viewed,
allowing for storage of records for a long period of time.
Light weight and compact size of the printer enables it to be set up in various
locations and be easily transported.
The printer is equipped with the RS-232C or current loop interface for data input, so
it allows easy connections between the printer and a weighing device such as an
electronic balance.
Dust-free paper sold separately is available for using the printer in cleanrooms
(AX-PP137-S).
Built-in clock function of the printer enables printing out of the date and time.
Printing at a regular interval is possible. (Interval printing)
Statistical calculation results of the weighing data, including standard deviation, can
be printed out.
Time series variation of the weighing data in chart form can be printed out.
The liquid crystal display provides easy conditions confirmation and settings of the
printer.
By pressing the key switch of the printer, a re-zero command to zero the display
and request commands for the weighing data can be transmitted to an electronic
balance, so the weighing data can be printed out without touching the highly
sensitive electronic balance.
To Next Page
Loading...