To Next PageTo Next Page
Need help?Do you have a question about the A&D HW-60KC and is the answer not in the manual?
General| Capacity | 60 kg |
|---|---|
| Display | LCD |
| Weighing Units | kg, lb, oz |
| Auto Power Off | Yes |
| Power Supply | AC adapter |
Step-by-step guide for assembling specific scale models using Method-A.
Step-by-step guide for assembling specific scale models using Method-B.
Step-by-step guide for powering the scale on/off and performing basic weighing.
How to use the tare function to cancel weight and display net values.
Procedure for storing the unit mass required for counting mode.
How to use the counting mode to determine the number of articles.
How to use and view the accumulation function and its related keys.
How to configure the comparator mode and judgment conditions.
How to input specific limit values for comparator modes.
Explains the auto-tare function for check weighing and its settings.
Comprehensive guide to performing scale calibration steps.
How to calibrate the scale's zero point.
How to calibrate the scale's span using a calibration weight.
Step-by-step guide to setting parameters within the function table.
A comprehensive list of all settable parameters and their functions.
