A&D SV-10 - Page 48

46
Output format example (2) With date and time added
Function setting
(√=Output Blank=No output)
5-td 1
Date/time
√
5-ed 0
Device
ID number
SV-10 output format example
Viscosity / Temperature Display Output format example
mPa⋅s / °C
1.23 mPa⋅s
,2003/03/19,12:34:56,+025.67,C,+00001.23,mPa s
: Space (ASC 20h)
SV-100 output format example
Viscosity / Temperature Display Output format example
Pa⋅s / °C
1.23 Pa⋅s
,2003/03/19,12:34:56,+025.67,C,+00001.23, Pa s
: Space (ASC 20h)
Output format example (3) To output the measured temperature and viscosity only
Function setting
(√=Output Blank=No output)
5-td 0
Date/time
5-ed 0
Device
ID number
SV-10 output format example
Viscosity / Temperature Display Output format example
mPa⋅s / °C
1.23 mPa⋅s
,,,+025.67,C,+00001.23,mPa s
: Space (ASC 20h)
SV-100 output format example
Viscosity / Temperature Display Output format example
Pa⋅s / °C
1.23 Pa⋅s
,,,+025.67,C,+00001.23, Pa s
: Space (ASC 20h)
Outputs in the order of date, time, temperature,
temperature unit, viscosity and viscosity unit.
The output data are 46 characters long excluding the
terminator.
Outputs in the order of temperature, temperature unit,
viscosity and viscosity unit.
The output data are 28 characters long excluding the
terminator.