- 11 -
Remote control does not work
• Before you press any playback control button, rst select the correct source.
• Reduce the distance between the remote control and the unit.
• Insert the battery with its polarities (+/-) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the unit.
I hear buzzing or humming
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does
not, the problem may be with the original device.
• Connect your device to a different input on the soundbar.
I can’t find the Bluetooth name of this unit on my Bluetooth device
• Ensure the Bluetooth function is activated on your Bluetooth device.
• Re-pair the unit with your Bluetooth device.
This is a 15 mins power off function, one of the ERPII standard requirement for saving
power
• When the unit’s external input signal level is too low, the unit will be turned off automatically in 15
minutes. Please increase the volume level of your external device.
To Next Page
