AMT/PTD/PBX/0058/4/6/EN Installation and Maintenance Manual - Aastra 5000
Page 156 01/2011 Description des sous-ensembles
4.4.3 Hardware and software configuration
During operation, the IUCV-D card does not have any hardware configuration.
4.4.4 Installation and wiring
The IUCV-D card can be hot-plugged/removed in an operational AXD iPBX.
The equipment connected to the
IUCV-D card has the installation details described in
Section 5.6:
• External music source
• Common bell (on R3 relay)
• Alarm bell (on R2 relay).
To Next Page
Loading...
