Features
535
System functions and features as of R3.0
syd-0367/1.3 – R3.0 – 03.2013
Tab. 357 User-independent features remote-controlled from within and from outside the system
Note:
With external remote control of features CFU and CFNR (*21, *61 and *67)
the destination number has to be defined in the internal numbering plan.
External destinations can therefore only be reached using abbreviated
dialling.
Enter several missing items (minibar) *51 Art. No. * Number #
Enter cleaning status *52 <State> #
Enter maintenance notice / delete all *53 Code # #53 #
Charge amount to guest room *54 <Art. No.> * <Amount> #
Log into / out of one UG *48 UG No. #48 UG No.
Activate / clear individual order for appointment call *55 hh mm #55
Activate / clear permanent order for appointment call *56 hh mm #56
Activate / clear CFNR *61 destination No. #61
Activate / clear CFNR to user last configured *61# #61
Activate / clear CFNR to preconfigured user *62 #62
Activate / clear call forwarding to general call with coded
ringing
*68 #68
Trigger Redkey function *73 <Parameter> #
Record voice mail greeting with phone (x=1,2,3) *913 x user PIN #
Check voice mail recording (x=1,2,3) *#913 x user PIN #
Delete voice mail recording (x=1,2,3) #913 x user PIN #
Record voice mail greeting with audio device (x=1,2,3) *923 x user PIN #
Activate voice mail greeting (x=1,2,3) *933 x user PIN #
Deactivate voice mail greeting (x=1,2,3) #933 x user PIN #
Listen to voice messages with audio guide *#94 user PIN #
Listen to voice messages without audio guide *#916 user PIN #
1)
only Office 135/135pro, Office 160pro/Safeguard/ATEX and phones of the Aastra 600d series
Feature Activate Reset
Set up the system time *57 hh mm
Set up the system date *58 dd mm yyyy
Operate switch groups *85 <Swith group><Pos.>
Actuate door opener *74 <No. of the door intercom system>
Switch control outputs *74 <Call number
1)
>
1)
call number assigned to this control output in the numbering plan
#74 <Call number
1)
>
Home alone *49 UG No. #49 UG No.
Feature Activate Reset