A5000 R5.2 Product Guide – Analogue terminals – Aastra 6700a
BPS0111AFRAA01 Page
5/8
• Mute: pressing the "mute" key during a call cuts the microphone (blinking LED). Moreover, to
start talking to your correspondent again, just press this same key (LED off).
• Amplified listening via the loudspeaker.
• Flash key: for managing hold / enquiry call.
• 8 memory keys with LED used to store up to 16 numbers (using the "shift" key) for speed-
dialling of these numbers.
• Message waiting: the Message Waiting Memory key is used to store the number of the
voicemail box associated with the user. When a message is waiting in the voicemail box, the
message waiting LED goes steady on red or blinks (configurable and depending on the card
on the iPBX). Pressing this key calls the voicemail box.
• Directory of 100 records maximum: it is possible to make a search in the directory, to add a
new number or delete a number.
• Call log:
•
The call log contains the last 50 calls made and the last 50 calls received (answered +
missed calls).
•
It is possible to view the call log with all the calls, or to select missed calls, answered
calls or made calls.
•
It is possible to delete one/several/all the records in the call log.
• Saving a phone number in the memory or in the directory, from the call log:
•
It is possible to configure a memory key with a call number from the call log.
•
It is also possible to call someone from the call log.
•
Area code filter: if the area code has been configured, it may be filtered in the first
digits of the incoming number. For instance: the area code is "755". If the incoming
call number is "755-12345678", the caller's number displays "12345678" whereas
"755" is filtered.
• Caller ID display (caller name + number): when an incoming call is received, the caller's
number is displayed on the LCD screen for 10 seconds.
• Call log
Saved incoming calls contain the caller's number and name, date and time of call, call duration
and icons: repeated call icon, missed call icon, unanswered call icon and received call icon.
Repeated
call
New
call
Incoming
call
Outgoing
call
Missed
call
Received
cal
If the received call log is full, the next incoming call will replace the oldest input in the log (first
in, first out).
After new missed calls are viewed, the "New call" icon disappears and the "Missed call" icon is
displayed.
The call log is stored in the terminal.
• Alarms:
•
The alarm format must be 24 H, HH/MM, and the telephone must then trigger the
alarm within 5 seconds after the local clock has reached the set alarm time.
•
Default alarm duration is 10 minutes, but it can be set to 5, 10, 15 or 30 minutes.
•
The alarm can be activated (ON) or deactivated (OFF).
Dit document wordt u aangeboden door TelecomHunter. Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl
To Next Page
Loading...
