To Next PageTo Next Page
Need help?Do you have a question about the AAT KaDe KDH-KZ2000-IP-U and is the answer not in the manual?
Step-by-step guide for physically installing the controller unit, including panel separation and wall attachment.
Details on using the controller's keypad for programming operations in standalone mode, including signaling functions.
Steps to access the programming menu, including indicator feedback and exit procedures.
Settings for controller initialization, alarm, tamper, door sensor, and exit button configurations.
Configuration of door unlock time and selection of access identification methods.
Procedures for adding single cards, bulk cards, and users with or without PIN codes.
Methods for deleting single users or all users from the system.
Managing administrator PINs and understanding PIN code security features.
General| Category | Controller |
|---|---|
| Communication Interface | TCP/IP, RS-485 |
| Supported Doors | 2 |
| Event Log Capacity | 100, 000 |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to 55°C |
| Supported Readers | Wiegand, RS-485 |
| Inputs | 4 (Door Sensor, Exit Button, Alarm) |
| Outputs | 2 (Relay Output for Lock, Alarm Output) |
| Humidity | 10% to 90% RH (non-condensing) |
