Need help?Do you have a question about the ABB 10DX3111 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Model | 10DX3111 |
| Manufacturer | ABB |
| Protection Rating | IP67 |
| Output Signal | 4-20 mA |
| Accuracy | ±0.075% |
| Power Supply | 10.5 to 42 V DC |
| Process Temperature | -40 to 121 °C |
| Ambient Temperature | -40 to 85 °C |
Details the Series 3000 Magnetic Flowmeter's characteristics, construction, and remote converter recommendations.
Provides a detailed breakdown of model numbers and available options for the flowmeters.
Outlines key technical specifications including power, characteristics, and environmental limits.
Details the steps for inspecting the flowmeter shipment for damage upon arrival.
Provides guidelines for safely handling the magnetic flowmeter, including lifting and protecting the liner.
Recommends optimal locations for installing the flowmeter, considering environmental factors.
Covers meter orientation, handling, and recommended piping arrangements for installation.
Details essential grounding procedures for both conductive and non-conductive pipelines.
Provides guidance on wiring the flowmeter to the signal converter, including safety warnings.
Explains the function and installation of conduit entry seals and pressure relief mechanisms.
Explains Faraday's Law and how voltage is generated based on liquid velocity through a magnetic field.
Discusses liquid conductivity, temperature, and other variables affecting meter accuracy.
Describes the primary signals and circuit components, including the magnet driver operation.
Covers routine maintenance, repair programs, and handling of static-sensitive components.
Provides guidance on diagnosing malfunctions and inspecting for water entry.
Details resistance and voltage tests for magnet coils and electrodes to identify electrical faults.
To Next Page
