Need help?Do you have a question about the ABB PFTL 101 and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | PFTL 101 |
| Category | Measuring Instruments |
| Language | English |
Describes the PFTL 101 load cells and the tension measuring system.
Outlines ABB's disclaimer regarding product and network security responsibilities.
Details ABB's environmental policy for product disposal and recycling procedures.
Explains the general function and design of the Pressductor Pillowblock Load Cells.
Explains the measuring principle based on Pressductor technology and force vectors.
Provides an overview of the PFTL 101 load cell family, materials, and connection types.
Presents detailed technical specifications, including nominal loads, overload capacity, and dimensions.
Defines key terms like nominal load and sensitivity relevant to load cell operation.
Explains the magnetic principle behind the Pressductor sensor operation.
Discusses considerations for positioning load cells for optimal accuracy and mounting methods.
Defines a coordinate system for force calculations in load cell principal directions.
Details the equations and considerations for horizontal mounting of the load cells.
Explains the equations and considerations for inclined mounting of the load cells.
Illustrates and explains the electrical circuit diagram of the load cell.
Provides general guidelines for careful handling and precise installation of the load cells.
Instructions for checking the equipment upon arrival and reporting any complaints.
Lists necessary documents, tools, and materials required before installation.
Specifies requirements for adapter plates, including flatness and material, for load cell installation.
Step-by-step instructions for mounting the load cell, adapter plates, and bearing housing.
Guidelines for proper cabling to prevent shunting forces and ensure system integrity.
Outlines the simple procedure for commissioning, provided installation is correct.
Explains the necessity of calculating measurement force per load cell before commissioning.
Highlights the reliability of the system and the need for periodic checks on wear parts.
Details checks for mounting screws, gaps, and cables for maintaining system performance.
Recommends keeping specific spare load cells and connectors in stock for immediate replacement.
Emphasizes the importance of understanding the system operation before troubleshooting.
Explains that load cells are interchangeable with proper zero adjustment in the control unit.
Outlines a systematic approach to identifying faults in mechanical, load cell, or cabling components.
Identifies common mechanical causes of repeatable faults like defective surfaces or force shunting.
Covers troubleshooting for wiring, junction boxes, and load cell windings.
Provides detailed dimensions and specifications for PFTL 101A load cells.
Presents dimensional data and specifications for PFTL 101AE load cells.
Shows dimension drawings and technical details for PFTL 101AER load cells.
Includes dimension drawings and specifications for PFTL 101B load cells.
Provides dimension drawings and technical data for PFTL 101BE load cells.
Presents dimension drawings and specifications for PFTL 101BER load cells.
Details dimensions and material specifications for lower adapter plates for PFTL 101A/AE/AER.
Shows dimension drawings and material specifications for upper adapter plates for PFTL 101A/AE/AER.
Provides dimension drawings and material specifications for lower adapter plates for PFTL 101B/BE/BER.
Details dimension drawings and material specifications for upper adapter plates for PFTL 101B/BE/BER.
To Next Page