ABB ProcessMaster FEP630 series User Manual

—
ABB MEASUREMENT & ANALYTICS | OPERATING INSTRUCTION
ProcessMaster FEP630, HygienicMaster FEH630
Electromagnetic flowmeter
—
ABB Limited
Measurement & Analytics
Howard Road, St. Neots
Cambridgeshire, PE19 8EU
UK
Tel: +44 (0)870 600 6122
Fax: +44 (0)1480 213 339
Email: enquiries.mp.uk@gb.abb.com
ABB Automation Products GmbH
Measurement & Analytics
Dransfelder Str. 2
37079 Goettingen
Germany
Tel: +49 551 905-0
Fax: +49 551 905-777
Email: vertrieb.messtechnik-produkte@de.abb.com
abb.com/flow
ABB Inc.
Measurement & Analytics
125 E. County Line Road
Warminster, PA 18974
USA
Tel: +1 215 674 6000
Fax: +1 215 674 7183
To find your local ABB contact visit:
abb.com/contacts
Devices-Firmware version: 01.07.00
Measurement made easy
OI/FEP630/FEH630-EN Rev. D 08.2018
—
FEP630
FEH630
FET630
Introduction
Intelligent design and extended functions for
efficient system operation at reduced costs and with
higher profitability.
ProcessMaster FEP630
The first choice for demanding applications in the
processing industry.
HygienicMaster FEH630
The first choice for demanding applications in the
food industry.
Additional Information
Additional documentation on FEP630, FEH630 is
available for download free of charge at
www.abb.com/flow.
Alternatively simply scan this code:
—
We reserve the right to make technical changes or modify the contents of this document
without prior notice. With regard to purchase orders, the agreed particulars shall prevail.
ABB does not accept any responsibility whatsoever for potential errors or possible lack of
information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained
therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in
parts – is forbidden without prior written consent of ABB.
Copyright© 2018 ABB
All rights reserved 3KXF231601R4201

ABB ProcessMaster FEP630 series Specifications

General

Brand	ABB
Model	ProcessMaster FEP630 series
Category	Measuring Instruments
Language	English

Summary

Safety Instructions and Guidelines

Use in Potentially Explosive Atmospheres

Safety guidelines for operating the device in hazardous environments.

Product Identification Details

Device Name Plate Information

Information found on the device's identification plate.

Installation Procedures and Conditions

Installation Safety Instructions

Critical safety precautions to be observed during installation.

Electrical Connections and Wiring

Electrical Connection Safety

Essential safety measures for electrical work and connections.

Sensor Grounding Procedures

Procedures for proper grounding of the sensor and system.

Pin Assignment and Terminal Layouts

Terminal and connection pinouts for various functions.

Device Commissioning and Setup

Commissioning Safety Precautions

Safety precautions before and during device commissioning.

Device Parameterization Methods

Methods for configuring device parameters.

Easy Setup Menu Parameterization

Step-by-step guide for initial device setup via the Easy Setup menu.

Device Operation and Menu Navigation

Operation Safety Instructions

Safety precautions to be taken during normal device operation.

Accessing Configuration Level

Accessing and changing device parameters.

Diagnosis and Error Message Handling

Comprehensive Error Message List

Extended Diagnostic Functions

Device Maintenance Procedures

Maintenance Safety Precautions

Critical safety measures before performing maintenance tasks.

Device Repair and Component Replacement

Repair Safety Instructions

Safety precautions for repair work, including explosion and electrical hazards.

Fuse Replacement Guide

LCD Indicator Replacement

Frontend Board Replacement

Technical Specifications and Data