ABB ProcessMaster 300 User Manual

SM/FEX300/FEX500/FM/CSA-EN
ProcessMaster, HygienicMaste
r
FEX300, FEX500
FM / cFM Div. 1, Div. 2
Safety information for electrical
equipment for potentially explosive areas
in accordance with Factory Mutual
Standards and Canadian Standards
Association
Electromagnetic Flowmeter

ABB ProcessMaster 300 Specifications

General

Brand	ABB
Model	ProcessMaster 300
Category	Measuring Instruments
Language	English

Summary

Safety

Electrical Installation Safety

Essential steps for safe electrical connection and grounding.

Symbols and Warnings

Device Designs

Compact Design Div. 1

Specifications for compact designs in Division 1 hazardous areas.

Compact Design Div. 2

Specifications for compact designs in Division 2 hazardous areas.

Remount Mount Design Div. 1

Specifications for remount mount designs in Division 1.

Remount Mount Design Div. 2

Specifications for remount mount designs in Division 2.

Mounting

Housing Access and Safety

Combustible Dust Areas

Guidelines for operating devices in areas with combustible dust.

Maximum Surface Temperature

Electrical Connection Procedure

Procedures and standards for electrical connections.

Ex Relevant Specifications for Div. 1

Electrical Connection in Div. 1

Wiring details for sensors and transmitters in Division 1 hazardous areas.

Sensor-Transmitter Combinations Div. 1

HART Protocol Electrical Data Div. 1

Electrical parameters for HART devices in Zone 1/Div. 1.

Fieldbus Electrical Data Div. 1

Electrical parameters for PROFIBUS PA/FOUNDATION fieldbus in Zone 1/Div. 1.

Temperature Data Zone 1 / Div. 1

Ex Relevant Specifications for Div. 2

Electrical Connection in Div. 2

Wiring details for sensors and transmitters in Division 2 hazardous areas.

HART Protocol Electrical Data Div. 2

Electrical parameters for HART devices in Zone 2/Div. 2.

Fieldbus Electrical Data Div. 2

Temperature Data Zone 2 / Div. 2

Commissioning

Preliminary Commissioning Checks

Mandatory checks before starting the device commissioning.

Sensor-Transmitter Compatibility Check

Changing Type of Protection

Maintenance

General Maintenance Information

Transmitter Replacement

Flowmeter Sensor Replacement