ABB ProcessMaster 300 - Device Designs; Compact Design Div. 1

Device designs
6 - EN FEX300, FEX500 SM/FEX300/FEX500/FM/CSA-EN
3 Device designs
The devices are available in two series. ProcessMaster 300 / HygienicMaster 300 with basic
functions and ProcessMaster 500 / HygienicMaster 500 with extended functions and options.
The series is identified by the fourth digit of the model number:
Model number / device series
FEP3... ProcessMaster 300 FEP5... ProcessMaster 500
FEH3... HygienicMaster 300 FEH5... HygienicMaster 500
Devices suitable for use in potentially explosive atmospheres feature the corresponding Ex
mark on their name plates.
The model for use in Div. 1 is identified by the character “R”, the model for use in 2 is identified
by the character “P” in the model number.
3.1 Model with compact design
The transmitter and the flowmeter sensor form a single mechanical entity.
IMPORTANT (NOTE)
For further information about the instruments' explosion protection approval please refer to the
Ex test certificates (available on the product CD or under www.abb.com/flow).
3.1.1 Div. 1
ProcessMaster 300 / ProcessMaster 500 HygienicMaster 300 / HygienicMaster 500
FEP315.....R.... / FEP515.....R.... FEH315.....R.... / FEH515.....R....
Div. 1 Div. 1
G00886
G00883
USA USA
FM approved FM approved
XP: CL I / DIV 1 / GP ABCD XP: CL I/ DIV 1/ GP ABCD
NI: CL III / DIV 1 NI: CL III/ DIV 1
DIP: CL II / DIV 1 / GP EFG DIP: CL II/ DIV 1/ GP EFG
DN 3-300:
CL I, ZN 1 AEx d e ia ma IIC T6 … T2
>DN 300:
CL I, ZN 1 AEx d e ia IIC T6 … T2
DN 3-2000:
Zone 21 Ex tD iaD A21 IP6X T70°C … T
medium
CL I, ZN 1 AEx d e ia ma IIC T6…T2
Zone 21 Ex tD iaD A21 IP6X T70°C … T
medium
Canada Canada
cFM approved cFM approved
XP: CL I/ DIV 1/ GP ABCD XP: CL I/ DIV 1/ GP ABCD
NI: CL III / DIV 1
DN 3-300: Ex d e ia ma IIC T6 … T2
>DN 300 : Ex d e ia IIC T6 … T2
NI: CL III/ DIV 1
Ex d e ia ma IIC T6 … T2
DIP: CL II / DIV 1 / GP EFG DIP: CL II/ DIV 1/ GP EFG
Fig. 1