ABB ProcessMaster 300 - Name Plate for Model with Remote Mount Design

Device designs
SM/FEX300/FEX500/FM/CSA-EN FEX300, FEX500 EN - 13
3.4.3 Name plate for model with remote mount design
G00630
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
FEP325
Fig. 3: Remote mount design
1 Model number (for more detailed information about
the technical design, refer to the data sheet or the
order confirmation)
2 Order no.
3 Meter size and nominal pressure rating
4 Material: Flange/lining/electrode
5 Client-specific TAG number (if specified)
6 T
med
= max. permissible fluid temperature
T
amb
= max. permissible ambient temperature
7 Protection type according to EN 60529
8 Calibration value Qmax DN
9 Calibration value Ss (span)
Calibration value Sz (zero point)
10 Year of manufacture
11CE mark
12Serial number for identification by the manufacturer
13Supplementary information: EE = grounding
electrodes, TFE = partial filling electrode
14Accuracy to which the unit was calibrated
(e.g., 0.2% of rate)
15

Excitation frequency of sensor coils
16Label indicating whether the unit is subject to the
Pressure Equipment Directive (PED).
Information on the relevant fluid group.
Fluid group 1 = hazardous fluids, liquid, gaseous.
(Pressure Equipment Directive = PED).
If the pressure equipment is not subject to the
Pressure Equipment Directive 2014/68/EU, it is
classified in accordance with SEP (= sound
engineering practice) as per Art. 3 Para. 3 of the PED.
If no such information is present, it means that the
device does not claim to comply with the requirements
of the Pressure Equipment Directive 2014/68/EU.
Water supplies and connected equipment accessories
are classed as an exception in accordance with
guideline 1/16 of Art. 1 Para. 3.2 of the Pressure
Equipment Directive.
17Ex mark according to FM (example)
18Ex mark according to cFM (example)
IMPORTANT (NOTE)
Meters with 3A approval are labeled with an additional plate.